*v 0008
*n code=0037 name="RudderServo"
Ý¿³æ¹Q‰
^Rudder uart error - getPosition..serial timeoutÝ¿é¹Q‰
þLCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Software Overcurrent. Current Limiter Activated.=#¿z‹R‰
6Beginning ground fault scan=#¿j·R‰
yLow side ground fault detected
mA:
CHAN A0 (Batt): 0.301285
CHAN A1 (24V): 0.270919
CHAN A2 (12V): 0.207313
CHAN A3 (5V): 0.118725
CHAN B0 (3.3V): 0.065970
CHAN B1 (3.15aV): 0.066326
CHAN B2 (3.15bV): 0.065504
CHAN B3 (GND): -0.036793
OPEN: 0.011729
Full Scale Calc: 4.765 mA, -1.589 mA*n code=0038 name="ThrusterServo"
]¿•lR‰
HInvalid EZ Servo response:"/0@5242"]¿o!*R‰
Overload Error]¿5©*R‰
Overload Error