*v 0008
*n code=0040 name="ElevatorOffsetCalculator"
= ¿Ra‰
õCompleted estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 3.19 mm. Average elevator angle=3.114182 +/- 0.096048 deg (conf. level 99.90%, sigma: 0.374336 deg).Ý¿ƒß"a‰
HInvalid EZ Servo response:"/0@5242"½!¿HM-a‰
6Beginning ground fault scan½!¿+y-a‰
QGround fault detected
mA:
CHAN A0 (Batt): 0.288735
CHAN A1 (24V): 0.257918
CHAN A2 (12V): 0.217636
CHAN A3 (5V): 0.077922
CHAN B0 (3.3V): 0.021395
CHAN B1 (3.15aV): 0.096339
CHAN B2 (3.15bV): 0.042845
CHAN B3 (GND): 0.052293
OPEN: 0.028854
Full Scale Calc: 4.765 mA, -1.589 mA*n code=0032 name="ElevatorServo"
]¿97a‰
`Elevator uart error - getPosition.serial timeoutÝ¿F¬Fa‰
4Unknown EZ Servo Error: 10*n code=0094 name="sci2:Lap:Wpt1:A.Waypoint"
=J¿x|a‰
LReached Waypoint: 41.376401,-71.011100Ý¿aøŠa‰
Overload Error