*v 0008 *n code=0045 name="ElevatorOffsetCalculator" "Completed estimation for commanded vars: speed 1.00 m/s, pitch -20.00 deg, mass-position 4.48 mm. Average elevator angle=0.846844 +/- 0.091904 deg (conf. level 99.90%, sigma: 0.368829 deg).""Completed estimation for commanded vars: speed 1.00 m/s, pitch 20.00 deg, mass-position 4.48 mm. Average elevator angle=-2.372998 +/- 0.099903 deg (conf. level 99.90%, sigma: 0.395181 deg).*n code=0039 name="ThrusterServo" F-JgetVelocity uart error serial timeoutF-FThruster uart error: serial timeout=$dx6Beginning ground fault scan=$ÐxqNo ground fault detected mA: CHAN A0 (Batt): -0.009281 CHAN A1 (24V): -0.028237 CHAN A2 (12V): -0.006350 CHAN A3 (5V): -0.001857 CHAN B0 (3.3V): 0.000217 CHAN B1 (3.15aV): 0.000133 CHAN B2 (3.15bV): -0.000176 CHAN B3 (GND): 0.002098 OPEN: 0.005541 Full Scale Calc: 4.765 mA, -1.589 mA*n code=00A1 name="sci2:Lap:Wpt1:A.Waypoint" PTLReached Waypoint: 40.333329,-71.166671THInvalid EZ Servo response:"/0@5242"HInvalid EZ Servo response:"/0@5242"