*v 0008
*n code=0038 name="ElevatorServo"
]����
PReading outside of valid range:0.000000
]�����
`Elevator uart error - getPosition.serial timeout��
l�
HInvalid EZ Servo response:"/0@5242"=$��!�
6Beginning ground fault scan=$��M�
mNo ground fault detected
mA:
CHAN A0 (Batt): -0.005501
CHAN A1 (24V): -0.022761
CHAN A2 (12V): -0.005164
CHAN A3 (5V): -0.001560
CHAN B0 (3.3V): 0.000458
CHAN B1 (3.15aV): 0.001119
CHAN B2 (3.15bV): 0.000448
CHAN B3 (GND): 0.001901
OPEN: 0.006751
Full Scale Calc: 4.765 mA, -1.589 mA]�!_T�
`Elevator uart error - getPosition.serial timeout�� �U�
HInvalid EZ Servo response:"/0@5242"=$��͍�
6Beginning ground fault scan=$�����
mNo ground fault detected
mA:
CHAN A0 (Batt): -0.006036
CHAN A1 (24V): -0.023934
CHAN A2 (12V): -0.005325
CHAN A3 (5V): -0.001225
CHAN B0 (3.3V): 0.000915
CHAN B1 (3.15aV): 0.000660
CHAN B2 (3.15bV): 0.000693
CHAN B3 (GND): 0.002110
OPEN: 0.006903
Full Scale Calc: 4.765 mA, -1.589 mA