*v 0008
*n code=002B name="Radio_Surface"
Ý¿ãçŒ
zLCB fault: LCB Watchdog Reset. Hardware Overcurrent Shutdown.Ý¿&m0çŒ
HInvalid EZ Servo response:"/0@4456"=#¿#f3çŒ
6Beginning ground fault scan=#¿’3çŒ
QGround fault detected
mA:
CHAN A0 (Batt): 0.320231
CHAN A1 (24V): 0.374125
CHAN A2 (12V): 0.160005
CHAN A3 (5V): 0.061860
CHAN B0 (3.3V): 0.036359
CHAN B1 (3.15aV): 0.053981
CHAN B2 (3.15bV): 0.043396
CHAN B3 (GND): 0.016246
OPEN: 0.023180
Full Scale Calc: 4.765 mA, -1.589 mA*n code=0034 name="ElevatorServo"
]¿ÊLçŒ
`Elevator uart error - getPosition.serial timeout