*v 0008
=żâ”iaŽ
tgot command set lineCaptureDepth.MissionTimeout 120 minute=żă”iaŽ
†got command set lineCaptureDepth.MicromodemCommsInterval 120 minute=żă”iaŽ
`got command set lineCaptureDepth.Repeat 10 count=żä”iaŽ
hgot command set lineCaptureDepth.MinAltitude 3 meter=żľŞiaŽ
dgot command set lineCaptureDepth.MaxDepth 10 meter=żżŞiaŽ
lgot command set lineCaptureDepth.MinOffshore 500 meter=żżŞiaŽ
got command run=żÄŞiaŽ
Running ˝(ż¨«iaŽ
@Started mission lineCaptureDepth˝]żő)jaŽ
8Undocking sequence complete.ÝżťX‹aŽ
LFailed to receive CAREV within timeoutÝżš[‹aŽ
ŽLCB 1 fault: LCB Watchdog Reset. Invalid Command. Software Overcurrent.=&żˡaŽ
6Beginning ground fault scan=&ż<öˇaŽ
Ground fault detected
mA:
CHAN A0 (Batt): 0.919590
CHAN A1 (24V): 0.848003
CHAN A2 (12V): 0.956505
CHAN A3 (5V): 0.695467
CHAN B0 (3.3V): 0.425355
CHAN B1 (3.15aV): 0.640894
CHAN B2 (3.15bV): 0.641853
CHAN B3 (GND): -0.028433
OPEN: 0.026791
Full Scale: +/- 1 mA*n code=003A name="BuoyancyServo"
]żD–ŔaŽ
\Buoyancy getPosition uart error.serial timeout