*v 0008
*n code=004C name="CBIT"
=&¿ÐzdcŽ6Beginning ground fault scan=&¿×¦dcŽ9Low side ground fault detected
mA:
CHAN A0 (Batt): 0.922164
CHAN A1 (24V): 0.847785
CHAN A2 (12V): 0.956107
CHAN A3 (5V): 0.771807
CHAN B0 (3.3V): 0.494022
CHAN B1 (3.15aV): 0.754487
CHAN B2 (3.15bV): 0.771897
CHAN B3 (GND): -0.051569
OPEN: 0.028857
Full Scale: +/- 1 mA*n code=00DD name="lineCaptureDepth:LineCapture:HomingSequence:TerminalGuidance:guide:F.LineCapture"
½n¿ï¡cŽrDocking sequence complete at range 3.60 m. Cable present.*n code=00FE name="lineCaptureDepth:Lap:Docked:Detach:A"
=¿CÓ¥cŽBBreaking off. Range: 2.220000 m .*n code=00FF name="lineCaptureDepth:Lap:Docked:Detach:Undock.Undock"
½¿$ý¦cŽ8Undocking sequence complete.½]¿Æq§cŽ8Undocking sequence complete.=&¿Q'ÕcŽ6Beginning ground fault scan=&¿úRÕcŽGround fault detected
mA:
CHAN A0 (Batt): 0.929299
CHAN A1 (24V): 0.854480
CHAN A2 (12V): 0.962459
CHAN A3 (5V): 0.775640
CHAN B0 (3.3V): 0.491761
CHAN B1 (3.15aV): 0.747911
CHAN B2 (3.15bV): 0.762686
CHAN B3 (GND): -0.002864
OPEN: 0.030461
Full Scale: +/- 1 mA½n¿?|ãcŽrDocking sequence complete at range 3.42 m. Cable present.*n code=002B name="Micromodem"
Ý¿[	ècŽLFailed to receive CAREV within timeoutÝ¿¦ècŽFLCB 1 fault:  Software Overcurrent.=¿JècŽBBreaking off. Range: 2.039999 m .½¿SécŽ8Undocking sequence complete.½]¿`ÇécŽ8Undocking sequence complete.Í¿S"dŽJSIGSEGV: address not mapped to objectÝ¿%dŽFLCB 1 fault:  Software Overcurrent.½(¿2%dŽBStarted mission DefaultWithUndock*n code=0060 name="DefaultWithUndock:LeaveDock:B.Undock"
=0¿R	dŽ8Undocking sequence complete.*n code=002F name="PowerOnly"
Ý¿T	dŽZloadControl LCB fault:  Software Overcurrent.