*v 0008 *n code=0045 name="ElevatorOffsetCalculator" "Completed estimation for commanded vars: speed 1.20 m/s, pitch -20.00 deg, mass-position 8.97 mm. Average elevator angle=2.120558 +/- 0.099257 deg (conf. level 99.90%, sigma: 0.396146 deg).=$-6Beginning ground fault scan=$Ground fault detected mA: CHAN A0 (Batt): 0.748581 CHAN A1 (24V): 0.715740 CHAN A2 (12V): 0.258587 CHAN A3 (5V): -0.000100 CHAN B0 (3.3V): 0.000958 CHAN B1 (3.15aV): 0.000122 CHAN B2 (3.15bV): 0.001444 CHAN B3 (GND): 0.000483 OPEN: 0.005718 Full Scale: +/- 1 mAPFailed to receive data from 1 sticks prior to timeout. Missing stick IDs are: 62.f:Expecting PD13 message format7!Failed to receive data from 1 sticks prior to timeout. Missing stick IDs are: 62.':Expecting PD13 message format4GFailed to receive data from 1 sticks prior to timeout. Missing stick IDs are: 62.Q:Expecting PD13 message format=$I.j6Beginning ground fault scan=$-ZjGround fault detected mA: CHAN A0 (Batt): 0.722570 CHAN A1 (24V): 0.718306 CHAN A2 (12V): 0.242381 CHAN A3 (5V): -0.000444 CHAN B0 (3.3V): 0.000903 CHAN B1 (3.15aV): 0.001008 CHAN B2 (3.15bV): 0.000964 CHAN B3 (GND): 0.000798 OPEN: 0.006042 Full Scale: +/- 1 mAny:Expecting PD13 message formatF{:Expecting PD13 message format=RJLReached waypoint: 40.500000,-70.666702&Ė.Started mission Default]FCould not get status:serial timeout]b:getSpeed error serial timeout]cFThruster uart error: serial timeout