*v 0008
=¿
÷Y¨
$got command gfscan*n code=0048 name="GFScanner"
=$¿bøY¨
6Beginning ground fault scan=$¿4
Z¨
-No ground fault detected
mA:
CHAN A0 (Batt): -0.010011
CHAN A1 (24V): -0.018454
CHAN A2 (12V): -0.007897
CHAN A3 (5V): -0.002072
CHAN B0 (3.3V): 0.000249
CHAN B1 (3.15aV): 0.000166
CHAN B2 (3.15bV): 0.000475
CHAN B3 (GND): 0.002109
OPEN: 0.005839
Full Scale: +/- 1 mA*n code=00C4 name="ballast_and_trim:StandardEnvelopes:A.AltitudeEnvelope"
=b¿Šc¨
„Altitude envelope ACTIVE. Altitude:1.990000m. At depth:10.501546m.*n code=00FC name="ballast_and_trim:RunBallastAndTrim:BallastAndTrim:BallastAndTrimAtTargetDepth:G."
=~¿úYc¨
rBallastAndTrim completed. Estimation time: 10.00 minutes.=~¿ûYc¨
¾Estimated buoyancyNeutral: 404.557931 +/- 1.538534 cc (conf. level 98.00%, sigma: 8.012199 cc).=~¿üYc¨
´Estimated massDefault: -8.593061 +/- 0.048597 mm (conf. level 98.00%, sigma: 0.253078 mm).=~¿üYc¨
ÂChanging persisted config values to: 404.557931 cc buoyancy neutral and -8.593061 mm mass default=~¿Zc¨
nListing configuration overrides from Data/persisted.cfg=~¿Zc¨
€// VerticalControl.buoyancyNeutral=265.936319 cubic_centimeter;
=~¿Zc¨
P// VerticalControl.massDefault=14.96352
=~¿Zc¨
HElevatorServo.offsetAngle=2 degree;
=~¿Zc¨
JMicromodem.surfaceThreshold=2 meter;
=~¿	Zc¨
DRudderServo.offsetAngle=2 degree;
=~¿	Zc¨
zVerticalControl.buoyancyNeutral=404.557931 cubic_centimeter;
=~¿
Zc¨
dVerticalControl.massDefault=-8.593061 millimeter;